1-800-346-7882 

CONSTRUCTION REPAIR PRODUCTS

 REPAIR

Damaged tub surfaces must be repaired before anyone will purchase a new home.

The right products for repairing tubs etc. is essential for professional results!

 Prices & Order Form

Used successfully to repair thousands of tubs worldwide

Porcelain, Fiberglass, Acrylic, Cultured Marble, Marble

 # KF-39             HOLE FILLER

Filler fast hardening for bridging holes and large cracks contains micro fibers for strength.

Requires white cream hardener.

More Information

 # KF-40         COLOR FAST

                    NON-YELLOWING

Filler medium hardening speed. Used for chip repairs that last forever, color fast, super hard and non-yellowing,

Requires Clear MEK hardener sold below.

The look and feel of the original porcelain or fiberglass when filled and sanded.  

More Information

# KF-41              CLEAR FILLER

Filler medium hardening speed. Used for chip repairs where clear filler is required for repair on deep colored tubs etc.

Requires Clear MEK hardener sold below.

The look and feel of the original porcelain or fiberglass when filled and sanded.  

More Information

# KF-43        SUPER FAST HARDENING

Filler fast hardening moderately hard. Great for general repairs on tub, counters etc.

Requires white cream hardener.

The look and feel of the original porcelain or fiberglass when filled and sanded.  

More Information

# KF-47            HIGH TEMPERATURE

Filler fast hardening white, super hard.  Withstands temp up to 475˚F.

Requires white cream hardener.

The look and feel of the original porcelain or fiberglass when filled and sanded.  

More Information

# HC   HARDENER CLEAR

1/2 oz. Clear hardener for KF-40 & 41Fillers

  # HW   HARDENER WHITE

1oz. White cream hardener for KF-39,43, 47.

  TINTS

  All fillers can be tinted with our tints 

   1/2 oz. bottle  

# TBLK   Tint color Black

# TBLU   Tint color Blue

# TO       Tint color Orange

# TR       Tint color Red

# TY       Tint color Yellow

# TW      Tint color White

# CRSK

   CHIP REPAIR Kit: (Basic repairs)

White Filler, hardener, assorted sand paper, tints, mixing sticks, porcelain& fiberglass touch-up glaze and instructions.

More Information

  # TUW  

     WHITE  Porcelain & Fiberglass Aerosol Touch-up 

Can be used for touchup on porcelain & fiberglass after filling with chip filler and sanding with proper sandpaper grades for a perfect repair.

# TUA 

ALMOND  Porcelain & Fiberglass Aerosol Touch-up 

Used for touchup on porcelain & fiberglass after filling with chip filler and sanding with proper sandpaper grades for a perfect repair.

# CLR 

   CLEAR Porcelain & Fiberglass Aerosol Touch-up 

Used for restoring gloss over repairs on porcelain & fiberglass after filling with chip filler and sanding with proper sandpaper grades for a perfect repair.

# 2-W  

  Surface Imperfection Blender 

For white tubs, sinks etc. only. Helps hide filled after sanding.

More Information

 # PB  

   Black Porcelain Streak & Stain Remover

 2 oz bottle use sparingly  (included applicator brush)

Removes black marks left on tubs from ladders, scaffolding and drywall stilts.

# S1MPC    Construction Cleanup

ALL Purpose Cleaner

CONCENTRATED

Mild acid and super soap combo gives

greater cleaning power  

Cleans grungy, construction crud covered tub and tiles like nothing you have used before. Will not etch the surface.,     

                   # SP White

White construction cleanup fiber scrub pads

# SB1000     Will NOT scratch surfaces          

Tub Scrubber

Electric

Orbital, NON Spinning

Uses NON abrasive White Scrubbing pads & S1MPC Cleaner

CLEANS TUBS SUPER FAST

DOES NOT LEAVE STREAKS

  SCRUB pads held to bottom of motor tool by Velcro hook. Bottom vibrates on orbital rotating bottom pad.             Will not sling water if used properly

110Volts AC double ground protection.

Requires external Ground Fault Interrupter sold separately

# PP  Pro-Polish

Pint container

Removes deep scratches from Fiberglass and Acrylic surfaces

 REQUIRES HIGH SPEED BUFFER FOR BEST RESULTS

# SPR-Polish

Pint container

Provides a deep long lasting shine to porcelain, fiberglass, acrylic and cultured marble surfaces.

HIGH SPEED OR HAND BUFF

  #HS Buffer          High Speed Buffer

2 Speed 2800 & 3300 RPM

                               Includes buffing pad

A must for removing minor scratches from fiberglass and cultured marble surfaces.   Both grades of SPR polish required for professional results.

Abrasive Paper  

50 Sheets per sleeve

180 use wet or dry

400 use wet or dry