1-800-346-7882 REPAIR PRODUCTS
|
|
|
REPAIR
Damaged surfaces must be repaired before they are restored. Using the right products for repairing damaged surfaces is essential for professional results!
NEVER USE Auto body repair products!
|
Used successfully to repair thousands of tubs worldwide
Porcelain, Fiberglass, Acrylic, Cultured Marble
|
|
CHIP REPAIR Kit For tub restoration
Order # CRSK Save by purchasing the Chip Repair Kit
Fiberglass # KF-39 HOLE FILLER Green with micro fiberglass fibers Requires white cream hardener
Filler fast hardening for bridging holes and large cracks contains micro fibers for strength.
|
|
|
# KF-40 CHIP FILLER COLOR FAST NON-YELLOWING Will not change colors over time
Can be tinted with SPR Tints
Requires Clear MEK hardener
Filler medium hardening speed. Used for chip repairs that last forever, color fast, super hard and non-yellowing,
The look and feel of the original porcelain or fiberglass when filled and sanded.
|
|
|
# KF-41 CHIP FILLER CLEAR Requires Clear MEK hardener
Filler medium hardening speed. Used for chip repairs where clear filler is required for repair on deep colored tubs etc.
The look and feel of the original porcelain or fiberglass when filled and sanded.
|
|
|
Covers Wear Through Areas SUPER FAST HARDENING Requires white cream hardener
Covers black wear through areas on porcelain and fiberglass tubs before coating with Slip-Grip. Super fast hardening easy to sand. Great for general repairs on tub, counters etc. Important: Repair made with KF-43 must be covered with a pigmented coating since it may change color over time if exposed to the light.
|
|
|
# KF- 47 CHIP FILLER Acrylic and HIGH TEMPERATURE Requires white cream hardener
Filler fast hardening white, super hard. Withstands temp up to 475˚F.
The look and feel of the original acrylic surface when filled and sanded
|
|
|
# HC HARDENER CLEAR
1/2 oz. Clear hardener for KF-40 & 41Fillers
WHITE 1oz. White cream hardener for KF-39, KF-43, KF-47.
All fillers can be tinted with our tints 1/2 oz. bottles
# TBLK Tint color Black # TBLU Tint color Blue # TO Tint color Orange # TR Tint color Red # TY Tint color Yellow # TW Tint color White These tints are for SPR fillers ONLY!
|
|
|
Surface Imperfection Blender For white tubs, sinks etc. only Helps blend in color of filled areas after sanding.
There is no such thing as a pure WHITE tub or sink!
We have found that micro intermixing of the colors below can match 99% of all white to almond tubs and sinks. (Custom colors available call for information)
SPR 2W Intertmix color system for the perfect color match # 2-W (Pure White) # 2-W (Gray White) # 2-W (Yellow White)
# 2-W (Bisque) # 2-W (Bone) # 2-W (Almond) # 2-W (Mocha)
# 2-W (Custom Colors)
|
|
|
Porcelain & Fiberglass Touch-up Aerosol For Use ONLY on extremely damaged areas where shower doors tracks were removed.
Used for touchup on porcelain & fiberglass after filling with chip filler and sanding with proper sandpaper grades for a perfect repair.
You can use white and almond sprayed alternately to produce an off white or a lighter almond. # TUW (WHITE) # TUA (ALMOND) # TUC (CLEAR) Restores gloss to perfectly color matched repair when not restoring the entire tub with the SPR NO Spray System.
|
|
# HW HARDENER
TINTS